X Leg insert is drawn for 1/8th inch material. Cut 8 inserts and 4 caster plates to go with Everbilt Brand 4 inch Casters sold at Home Depot. I believe these plates will fit the 3, 4, and 5 inch caster. Must be welded square. Could possibly need a small weld to snug or light grinding if it is too snug. https://www.homedepot.com/p/Everbilt-4-in-Red-TPU-Heavy-Duty-Swivel-Plate-Caster-with-Brake-250-lbs-Weight-Capacity-800865/306756459
Creative Commons - Attribution - Non-Commercial
You may remix, tweak, and build upon this work non-commercially, and although your new works must also acknowledge Cameron and be non-commercial, you don’t have to license your derivative works on the same terms.
3 years ago
365
Basic
crossfirepro casters
- Caster Plate.dxf
- Inner Leg X.dxf
- IMG_7372.jpg
- IMG_7374.jpg
- IMG_7375.jpg
- IMG_7376.jpg
- IMG_7377.jpg
- IMG_7379.jpg
-
Jim Maltby - 3 years ago
Good idea! I was just thinking about bigger casters for my table and figured I would have to make something. Thanks for sharing! -
Cameron (OP) - 3 years ago
I meant to add this in the description. Be sure to only welded inside of the X so the table’s leg and rest in the plate. The center hole isn’t required. I used it for indexing and decided to use it for a center weld anyways -
Michael Barker - 3 years ago
I used this file it worked great. -
Alex Kennedy - 2 years ago
Downloaded and opened dxf in fusion, plates are only 3"x2"? -
SHAWN LOWERY - 1 year ago
There's no measurement info related to this dfx file. Am I missing something? -
luis - 1 year ago
needed only the caster plate template to make a base for another tool...holes are dead on, thanks! -
Ronald Herring - 1 year ago
Thanks this will workout great
Cameron (OP) - 3 years ago